Wednesday, 8 April 2009

How to photograph the moon

Taking a decent moon photo is not too difficult but you need to have some equipment for it. The most important one is a proper tripod or similar support for the camera. Almost as important is a decent telephoto lens. A sharp 200 mm telephoto lens is a good start for photos like this:


But even if you have the best possible gear you still need to see the moon. So, check the moon phase calendar, weather forecast and head to a dark location. Usually cities have way too much light pollution and this reduces the contrast between the sky and the moon. Find a dark area with solid ground for your tripod.

Then set up your tripod as stable as possible. Do not extend it completely unless really necessary. Select your telephoto lens with longest focal length and remove any filters you have. Even high quality filters can cause unwanted flare.

Use low ISO setting to avoid noise - ISO 100 works well. I do not pay attention to white balance as I shoot on RAW which allows more post processing options. Use mirror lock up if available and use long timer to trigger the shutter. These help to reduce camera shake and therefore improve image quality. The choice between manual and automatic focus is up to you. When using a lens without distance view the autofocus might be a better option.

Finding the right aperture for your lens needs some experiment. Most lenses have their sweet spot around f8-f11. Any higher aperture number causes diffraction which reduces image sharpness. Too low aperture number leads to soft photos especially on cheaper zoom lenses.

After all this setup the last step is to aim the center of the moon and select the right exposure. There are calculators for moon photography but couple test shots give you a good idea anyways. Depending on your camera its exposure metering it might give totally misleading results so feel free to ignore it.

Take plenty of shots with different aperture and exposure times. At the post processing I use only green color component because it seems to have less noise compared to red. I also reduce saturation so the end result is black and white. Apply some sharpening, crop tight and upload to your favorite image gallery for feedback.

Edit: I added more tips for photographing the moon. Take a look!

4 comments:

  1. Nice post. Seems like there's going to be some quality posts. I'll be following your blog via google reader. If you get a chance, let me know your thoughts on my blog as well. www.marcpaynephotoblog.com

    I'll also link to your site. Hopefully will drive some more traffic your way. Always appreciated in return :) www.blogroll.com

    Keep the good stuff coming!

    Marc Payne

    ReplyDelete
  2. Haha, get away from cities, and this was shot from in front of our maindoor :-)

    ReplyDelete
  3. I just did some moon photography out in Joshua Tree with a digital camera. My goal was to capture a shot of the moon by itself close up so that I could potentially use the image in other nighttime shots. Here's what I got:

    http://www.sensoryescapeimages.com/blog/2010/9/26/how-to-photograph-the-moon.html

    ReplyDelete
  4. Good post,what exposure time(s) would you recommend for a lunar eclipse? Thanks.

    ReplyDelete